Power Winches

Features

• Low maintenance
• Dimensional accuracy
• Long service life

 

Specifications

• Capacity 12 MT
• Rope Drum Winch Machine For Radial Gate and Intake Gate

 

Product details

• Design Hoists are designed for all classes of an application as per IS-3938. Standard Design is for Class II.
• Modular Construction Hoist is assembled from different independent units viz. Hoisting Gear Box, Hoisting Motor with brake, Rope Drum, Electric Control Panel and Travelling Trolley. All these units are separately accessible and promptly disassembled to simplify repairs, reduce maintenance cost and downtime.
• Main Frame M.S. Plates are fastened with number studs to withstand the load of the different independent units attached to it.
• Wire Rope Hoisting rope comply with the Indian standards IS2266. The factor of safety, on the nominal breaking strength of the rope, is six.
• Rope Drum Grooved Drum, Seamless Pipe of adequate length to be wounded in one/two layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft revolves on self-aligned roller Bearings for ensuring smooth running.
• Rope Guide Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in the unloaded condition.
• Motor Motor are of Squirrel Cage, 40% CDF rating in class B insulation as per IS-325-1970, The unit is an IP 54 dust and damp proof enclosure, flange-mounted to the main frame of the Hoist. When creep speeds are required same is achieved by way of DC Clutch manufactured by NGEF/ Bharat BIJLEE/ GEC/ Crompton/ own make. Hoist Motor is an HTSC parallel rotor machine. Specially rated for Hoist
• Gear Box Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on bailor roller bearings, to ensure smooth, low-friction operation, the gear trains are grease lubricated. Also, oil immersed Gear Box can be provided on request.
• Brake Electromagnetic Fail-safe type brake mounted externally on the rear end of the Hoisting Motor ensuring easy accessibility.

Electric Rope Winches are designed as per IS-9507-1979 and are suitable for heavy duty applications. Generally, Winches with Right Hand Operation are manufactured. However, the same can supplied with other side operation also as per requirement.

Basic Frame :- Fabricated with I.S.M.C. & C Sections / Plates properly ribbed, floored with checkered plate platform for working area, lifting lugs, Anchoring Holes for foundation provided.